|
| |
| The B-104 Pushbutton Interface provides a convenient way of connecting
remote pushbuttons to any of the BrightSign players which have a GPIO 15 pin
connector. In this way heavy duty pushbuttons, such as the Museum
Technology X-6000 series, are all that is seen by the public.
Instead of pushbuttons, other activators such as the
BB-200 Motion Sensor or the KD-1 or
KD-3 Proximity Switches may be employed. For
convenience in programming and installation testing, four illuminated
pushbuttons are provided on the B-104. These buttons duplicate the
function of the remotely mounted buttons, thus allowing the exhibit to be
fully tested prior to actual installation. |
 |
Technical Specifications: |
|
Number of Button Inputs |
Four |
Button Connectors |
RJ-11 Modular Telephone, 6 position, 4 contact |
|
Lamp illumination |
12 Volt DC nominal at 250 mA max. NPN transistor
conducts to ground when active |
|
Power supply connector |
2.1 mm, center positive |
|
Connection to BrightSign |
15 pin male D-Sub connector on 12" cable |
|
Panel controls |
Power LED, 4 illuminated pushbuttons in parallel with
remote pushbuttons |
|
Compatible BrightSign Models |
Any with 15 pin GPIO connector: HD120, HD1020, XD1030,
XD1230 |
|
Programming method |
BrightAuthor GPIO commands |
|
Mounting |
Flange with screw holes |
|
Physical |
5.75" wide 4.75 high 2.5" deep (14.6x 12 x 6.4 mm) |
|
Download Instructions
Return to Products
|
